Threaded Assembly Rupture Disks
ねじ式組立品
Threaded Assembly
Disassembled Threaded
性能
- 管理された圧力制度
- 漏れなし、工場出荷前に漏れ試験済
- “ボトルタイト”なのでガスシリンダーや圧力ゲージ、水圧アキュムレーター、ポータブル圧縮空気システムなどでの使用に非常に適しています
- FRB、B、D、またはMini XTラプチャーディスクで使用可能
- UD認定
お問い合わせはこちらから
Sizes & Pressures
Burst Tolerance
| Marked Burst Pressure | Burst Tolerance |
|---|---|
| ≤ 40 psig (2.76 barg) | ± 2 psig (0.138 barg) |
| > 40 psig (2.76 barg) | ± 5% |
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
Sizes & Pressures
Burst Tolerance
| Marked Burst Pressure | Burst Tolerance |
|---|---|
| ≤ 40 psig (2.76 barg) | ± 2 psig (0.138 barg) |
| > 40 psig (2.76 barg) | ± 5% |
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.