Detec-Saf™ Alarm System
バースト・ディスク・モニター・アラームシステム
性能
- 加圧状態で破裂板が破裂開放した場合瞬時に場所と時間を特定
- ２チャンネル/８チャンネルの２タイプのバーストディスクモニター：１ユニットに対し１～８か所からの遠隔モニタリング可能
- アクセスできない場所にあるものも含め、全ての破裂板を１か所でモニタリングすることができます
- 標準キャビネットは表面取り付け設計 その他の取り付けやエンクロージャーについてはお問い合わせください
- 適切に設置されていればClass I/II、Division 1、Group A/B/C/D/E/FとGroupGの危険地域での使用に対応
- 本質的安全設計のためのガイドライン（U.L. Publication 913）に準拠した設計
お問い合わせはこちらから
Specifications
| Input power | 115/230 Vac, 50/60 HZ |
| Signal level to Burst AlertTM Sensor | 5 Vdc @ 20 mA maximum |
| External output relays | 10 amps @ 240 Vac maximum, resistive 5 amps @ 240 Vac maximum, inductive |
| Operating temperature | -40° to 122°F (-40° to 50°C) |
| Cabinet | Standard steel cabinet meets specifications for NEMA 2 enclosures. Consult factory for other types. |
| Dimensions | BDM 1500 and 2000 7.13 x 5.87 x 8 inches BDM 7500 and 8000 7.13 x 17.5 x 8 inches |
| Mounting | Standard units are designed for surface mounting. Wall or panel mounting options are vailable. |
Safety Heads (Holder)
Sensors
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
Specifications
| Input power | 115/230 Vac, 50/60 HZ |
| Signal level to Burst AlertTM Sensor | 5 Vdc @ 20 mA maximum |
| External output relays | 10 amps @ 240 Vac maximum, resistive 5 amps @ 240 Vac maximum, inductive |
| Operating temperature | -40° to 122°F (-40° to 50°C) |
| Cabinet | Standard steel cabinet meets specifications for NEMA 2 enclosures. Consult factory for other types. |
| Dimensions | BDM 1500 and 2000 7.13 x 5.87 x 8 inches BDM 7500 and 8000 7.13 x 17.5 x 8 inches |
| Mounting | Standard units are designed for surface mounting. Wall or panel mounting options are vailable. |
Safety Heads (Holder)
Sensors
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.