FF-C™ホルダー
サニタリープリアッセンブリー型ホルダー
性能
- ホルダー内の位置決めピンが破裂板の位置決めホールと接合する事により、破裂板のセンタリングと正しい取付け方向を確保
- セーフティヘッドの側面に刻印されているフロー矢印は、正しいフロー方向を示します
- サニタリートライクランプ配管接続に使用
- ラプチャーディスクのドーム部は、配管システムに設置される際の損傷を避けるため、ホルダー内で完全に保護されています
- 表面仕上げは規格に応じて指定可
お問い合わせはこちらから
Sizes & Pressures
FF-C Holder Dimensions| Disk Size | Clamp Connection Size/Tube O.D. (inch) | Height | ||||
| in | mm | @ Inlet | @ Disk | @ Outlet | in | mm |
|---|---|---|---|---|---|---|
| 1 | 25 | 1.5 | 1.5 | 1.5 | 3 | 76 |
| 1.5 | 40 | 2 | 2 | 2 | 3 | 76 |
| 2 | 50 | 3 | 3 | 3 | 3 | 76 |
| 3 | 80 | 4 | 4 | 4 | 4 | 102 |
| 4 | 100 | 6 | 6 | 6 | 5.5 | 140 |
Rupture Disks
Standard Materials
316 stainless steel and carbon steel.
Also available Monel® alloy 400, Inconel® alloy 600, Hastelloy® alloy C and C-276, aluminum, and titanium.
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
Sizes & Pressures
FF-C Holder Dimensions| Disk Size | Clamp Connection Size/Tube O.D. (inch) | Height | ||||
| in | mm | @ Inlet | @ Disk | @ Outlet | in | mm |
|---|---|---|---|---|---|---|
| 1 | 25 | 1.5 | 1.5 | 1.5 | 3 | 76 |
| 1.5 | 40 | 2 | 2 | 2 | 3 | 76 |
| 2 | 50 | 3 | 3 | 3 | 3 | 76 |
| 3 | 80 | 4 | 4 | 4 | 4 | 102 |
| 4 | 100 | 6 | 6 | 6 | 5.5 | 140 |
Rupture Disks
Standard Materials
316 stainless steel and carbon steel.
Also available Monel® alloy 400, Inconel® alloy 600, Hastelloy® alloy C and C-276, aluminum, and titanium.
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.