Explosion Vents
エクスプロージョンベンツ
性能
- ユニークで経済的な特許デザイン
- 正確で信頼性が高く、漏れがありません
- 優れた耐摩耗性
- プロセス側にスリットのない一体型金属構造で、製品の蓄積を防ぎます
- 無菌/サニタリーアプリケーション用のオプション設計
- 穴が開いたり、湿気を含んだりする可能性のある壊れやすいPTFEシールは使用していません
- 複合構造に比べて質量が小さいため、動的性能に優れています
- 動作圧力は最低タグ定格圧力の60%まで（特定の条件下では80%）
- 2000°F/1093°Cまでの動作温度で使用可能な断熱材により、熱損失を低減し、結露を防止します
- ガスケット一体型で、取付け準備完了
- Fail-Safe設計で、破損した場合、下方にリリーフ開口部を設けます
お問い合わせはこちらから
Types
| Vent-Saf Explosion Vents | |
| Types VSP™ and VSS™ | Domed single section metal explosion vents with integral gaskets. The dome resists vacuum and vacuum cycling. |
| Type VSP-M™ | A flat, single section explosion panel with integragal frame and gaskets designed for applications in dust collectors, cyclones, conveyors. |
| Type VSP-L | Stainless steel vent designed for low pressures to 0.33 psig (0.022 barg) |
| Type VSE™ | A flat, single section metal explosion vent with integral gaskets designed for near static operating pressures. |
| Type VSB™ | Building vent for protection of building structures by very low pressure explosion vents. |
| Type EXP™ | A flat vent with a slotted 316ss top section and FEP / PTFE seal. |
| Type EXP-V™ | provides vacuum support |
| Type EXP-DV™ | A round domed explosion vent of composite construction with integral vacuum support and gaskets. |
| Type LCV™ | A flat explosion vent of composite construction with integral gaskets. |
| Type HTV™ | A lightly domed vent designed for high temperature service to 1,000°F (538°C) and above. |
Current Certifications
- High operating ratio up to 100% (CE) / 95% (ASME)
- Full vacuum resistance
- Solid metal construction enabling optimum leak tightness
- Designed for non-fragmentation
- Recommended for isolation of pressure relief valves
- Three-dimensional stainless steel tag with product identification and traceability data, as well as code symbol stamps as required
Rectangular/Square Panel Dimensions
| Nominal Size | Frame Inside | Frame Outside | Area | ||||
| in | mm | in | mm | in | mm | in2 | cm2 |
|---|---|---|---|---|---|---|---|
| 9 x 12 | 230 x 305 | 9 x 12 | 230 x 305 | 13 x 16 | 330 x 406 | 98 | 630 |
| 12 x 18 | 305 x 457 | 12 x 18 | 305 x 457 | 13 x 16 | 406 x 559 | 201 | 1298 |
| 18 x 18 | 457 x 457 | 18 x 18 | 457 x 457 | 22 x 22 | 559 x 559 | 306 | 1976 |
| 18 x 24 | 457 x 610 | 18 x 24 | 457 x 610 | 22 x 28 | 559 x 711 | 411 | 2653 |
| 18 x 30 | 457 x 762 | 18 x 30 | 457 x 762 | 22 x 34 | 559 x 864 | 516 | 3330 |
| 18 x 36 | 457 x 915 | 18 x 36 | 457 x 915 | 22 x 40 | 559 x 1016 | 621 | 4008 |
| 18 x 46.5 | 457 x 1181 | 18 x 46.5 | 457 x 1181 | 22 x 50.5 | 559 x 1283 | 789 | 5091 |
| 19 x 59 | 483 x 1499 | 19 x 59 | 483 x 1499 | 23 x 63 | 584 x 1600 | 1082 | 6982 |
| 24 x 24 | 610 x 610 | 24 x 24 | 610 x 610 | 28 x 28 | 711 x 711 | 552 | 3562 |
| 24 x 30 | 610 x 762 | 24 x 30 | 610 x 762 | 28 x 34 | 711 x 864 | 693 | 4473 |
| 24 x 36 | 610 x 915 | 24 x 36 | 610 x 915 | 28 x 40 | 711 x 1016 | 834 | 5382 |
Note: Other vent or panel sizes, materials and burst pressures are available upon request – consult BS&B.
Round Panel Dimensions
| Nominal Size | Frame Inside | Frame Outside | Frame Angle | Area | |||||
| in | mm | in | mm | in | mm | in | mm | in2 | cm2 |
|---|---|---|---|---|---|---|---|---|---|
| 16 | 406 | 16.25 | 412.75 | 19.75 | 501.65 | 1.75 | 44.45 | 192 | 1236 |
| 18 | 457 | 18.25 | 463.55 | 21.75 | 552.45 | 1.75 | 44.45 | 243 | 1568 |
| 20 | 508 | 20.25 | 514.35 | 23.75 | 603.25 | 1.75 | 44.45 | 301 | 1939 |
| 24 | 610 | 24.25 | 615.95 | 27.75 | 704.85 | 1.75 | 44.45 | 434 | 2799 |
| 30 | 762 | 30.25 | 768.35 | 34.25 | 869.95 | 2 | 50.8 | 680 | 4385 |
| 32 | 813 | 32.25 | 819.15 | 36.25 | 920.75 | 2 | 50.8 | 774 | 4992 |
| 36 | 915 | 36.25 | 920.75 | 40.25 | 1022.35 | 2 | 50.8 | 980 | 6325 |
| 40 | 1016 | 40.25 | 1022.35 | 44.25 | 1123.95 | 2 | 50.8 | 1211 | 7815 |
| 44 | 1118 | 44.25 | 1123.95 | 48.25 | 1225.55 | 2 | 50.8 | 1467 | 9462 |
Note: Other vent or panel sizes, materials and burst pressures are available upon request – consult BS&B.
Product Literature
Types
| Vent-Saf Explosion Vents | |
| Types VSP™ and VSS™ | Domed single section metal explosion vents with integral gaskets. The dome resists vacuum and vacuum cycling. |
| Type VSP-M™ | A flat, single section explosion panel with integragal frame and gaskets designed for applications in dust collectors, cyclones, conveyors. |
| Type VSP-L | Stainless steel vent designed for low pressures to 0.33 psig (0.022 barg) |
| Type VSE™ | A flat, single section metal explosion vent with integral gaskets designed for near static operating pressures. |
| Type VSB™ | Building vent for protection of building structures by very low pressure explosion vents. |
| Type EXP™ | A flat vent with a slotted 316ss top section and FEP / PTFE seal. |
| Type EXP-V™ | provides vacuum support |
| Type EXP-DV™ | A round domed explosion vent of composite construction with integral vacuum support and gaskets. |
| Type LCV™ | A flat explosion vent of composite construction with integral gaskets. |
| Type HTV™ | A lightly domed vent designed for high temperature service to 1,000°F (538°C) and above. |
Current Certifications
- High operating ratio up to 100% (CE) / 95% (ASME)
- Full vacuum resistance
- Solid metal construction enabling optimum leak tightness
- Designed for non-fragmentation
- Recommended for isolation of pressure relief valves
- Three-dimensional stainless steel tag with product identification and traceability data, as well as code symbol stamps as required
Rectangular/Square Panel Dimensions
| Nominal Size | Frame Inside | Frame Outside | Area | ||||
| in | mm | in | mm | in | mm | in2 | cm2 |
|---|---|---|---|---|---|---|---|
| 9 x 12 | 230 x 305 | 9 x 12 | 230 x 305 | 13 x 16 | 330 x 406 | 98 | 630 |
| 12 x 18 | 305 x 457 | 12 x 18 | 305 x 457 | 13 x 16 | 406 x 559 | 201 | 1298 |
| 18 x 18 | 457 x 457 | 18 x 18 | 457 x 457 | 22 x 22 | 559 x 559 | 306 | 1976 |
| 18 x 24 | 457 x 610 | 18 x 24 | 457 x 610 | 22 x 28 | 559 x 711 | 411 | 2653 |
| 18 x 30 | 457 x 762 | 18 x 30 | 457 x 762 | 22 x 34 | 559 x 864 | 516 | 3330 |
| 18 x 36 | 457 x 915 | 18 x 36 | 457 x 915 | 22 x 40 | 559 x 1016 | 621 | 4008 |
| 18 x 46.5 | 457 x 1181 | 18 x 46.5 | 457 x 1181 | 22 x 50.5 | 559 x 1283 | 789 | 5091 |
| 19 x 59 | 483 x 1499 | 19 x 59 | 483 x 1499 | 23 x 63 | 584 x 1600 | 1082 | 6982 |
| 24 x 24 | 610 x 610 | 24 x 24 | 610 x 610 | 28 x 28 | 711 x 711 | 552 | 3562 |
| 24 x 30 | 610 x 762 | 24 x 30 | 610 x 762 | 28 x 34 | 711 x 864 | 693 | 4473 |
| 24 x 36 | 610 x 915 | 24 x 36 | 610 x 915 | 28 x 40 | 711 x 1016 | 834 | 5382 |
Note: Other vent or panel sizes, materials and burst pressures are available upon request – consult BS&B.
Round Panel Dimensions
| Nominal Size | Frame Inside | Frame Outside | Frame Angle | Area | |||||
| in | mm | in | mm | in | mm | in | mm | in2 | cm2 |
|---|---|---|---|---|---|---|---|---|---|
| 16 | 406 | 16.25 | 412.75 | 19.75 | 501.65 | 1.75 | 44.45 | 192 | 1236 |
| 18 | 457 | 18.25 | 463.55 | 21.75 | 552.45 | 1.75 | 44.45 | 243 | 1568 |
| 20 | 508 | 20.25 | 514.35 | 23.75 | 603.25 | 1.75 | 44.45 | 301 | 1939 |
| 24 | 610 | 24.25 | 615.95 | 27.75 | 704.85 | 1.75 | 44.45 | 434 | 2799 |
| 30 | 762 | 30.25 | 768.35 | 34.25 | 869.95 | 2 | 50.8 | 680 | 4385 |
| 32 | 813 | 32.25 | 819.15 | 36.25 | 920.75 | 2 | 50.8 | 774 | 4992 |
| 36 | 915 | 36.25 | 920.75 | 40.25 | 1022.35 | 2 | 50.8 | 980 | 6325 |
| 40 | 1016 | 40.25 | 1022.35 | 44.25 | 1123.95 | 2 | 50.8 | 1211 | 7815 |
| 44 | 1118 | 44.25 | 1123.95 | 48.25 | 1225.55 | 2 | 50.8 | 1467 | 9462 |
Note: Other vent or panel sizes, materials and burst pressures are available upon request – consult BS&B.