性能

  • 気相・液相・混合流体兼用
  • 破裂圧力の80%まで運転可能(破裂誤差下限の85%まで)
  • 真空耐性あり(破裂圧力によってはバキュームサポートの取り付けが必要)
  • 破裂圧力が22psigより大きい場合真空耐性あり
  • ASME “UD”スタンプ対応(製造範囲0%選定)
  • 圧力機器指令 “CE” マーク及びその他国際証書対応
  • オプション:フルオロポリマーライナー/コーティング
  • オプション:アーマーリング
  • オプション:断熱アッセンブリー
  • BS&B 独占技術

  • お問い合わせはこちらから

     

    Sizes & Pressures

    IMB™, AIMB™, IMBL™ and AIMBL™ Disk Specifications Minimum/Maximum Pressure with Rating at 72° (22°C)

    Disk Size Burst Pressure Disk Thickness ANSI Flange Rating DIN
    psig barg
    in mm min max min max in mm
    0.5 15 25 250 1.7 17 0.6  16 150 10/16
    0.5 15 25 1000 1.7 69 0.6  16 300/600 25/40
    0.75 20 25 250 1.7 17 0.6  16 150 10/16
    0.75 20 25 1000 1.7 69 0.6  16 300/600 25/40
    1 25 10 250 0.7 17 0.9 22 150 10/16
    1 25 10 1000 0.7 69 0.9 25 300/600 25/40
    1.5 40 7 250 0.5 17 0.9 22 150 10/16
    1.5 40 7 1000 0.5 69 1.0 25 300/600 25/40
    2 50 2 250 0.1 10.3 0.9 22 150 10/16
    2 50 3 500 0.2 34 1.0 25 300/600 25/40
    3 80 1 250 0.1 17 0.9 22 150 10/16
    3 80 2 500 0.1 34 1.2 32 300 25/40
    4 100 1 250 0.1 17 0.9 22 150 10/16
    4 100 1.5 500 0.1 34 1.3 32 300 25/40
    6 150 1 170 0.1 12 0.9 22 150 10/16
    6 150 1 450 0.1 31 1.8 44 300 25/40
    8 200 0.5 170 0.04 12 1.1 29 150 10/16
    8 200 0.5 450 0.04 31 2.3 57 300 25/40
    10 250 0.3 150 0.02 10 1.5 38 150 10/16
    12 300 0.3 150 0.02 10 2.0 51 150 10/16
    14 350 0.3 150 0.02 10 2.3 57 150 10/16
    16 400 0.3 150 0.02 10 2.5 64 150 10/16
    18 450 0.3 150 0.02 10 2.8 70 150 10/16
    20 500 0.3 150 0.02 10 3.0 76 150 10/16
    24 600 0.3 150 0.02 3.4 3.0 76 150 10/16

    Burst Tolerance

    Marked Burst Pressure Burst Tolerance
    < 1 psig (0.07 barg) -0/+0.75 psig (0/0.05 barg)
    1 – 15 psig (0.07 barg < 1.03 barg) ± 0.75 psig (0.05 barg)
    > 15 psig (1.03 barg) ± 5%
    For sizing, see the BS&B website or contact BS&B for appropriate KR

    Example: If a Saf-T-Graf IMB type disk is ordered with a 29 psig (2 bar) burst pressure, it will burst between 27.5 psig (1.9 bar) and 30.5 psig (2.1 bar). For reduced tolerances contact BS&B.

    Armored Option

    Armor is recommended for all graphite disks for added safety and elimination of breakage during installation. Armor consists of a steel ring encircling the outside diameter of the graphite rupture disk.

    Armor is standard on disks with burst pressures in excess of 150 psig or to fit ANSI Class 300 / 600 flanges. Carbon steel armor is standard with 300 series stainless steel as an option. Armor is recommended for applications where lateral blow out / loss of containment represents a safety concern.

    Armor for disks sizes shown when rated pressures equal to or exceed values in the below chart.

    Size Burst Pressure
    in mm psig barg
    0.5-3 15-80 150 10.3
    4 100 100 6.9
    6-10 75 75 5.2
    12-24 50 50 3.5

    Product Literature

    Saf-T-Graf™ Graphite Disks
    Burst Alert Sensors
    Detec Saf Alarm System – Burst Disk Monitor

    Sizes & Pressures

    IMB™, AIMB™, IMBL™ and AIMBL™ Disk Specifications Minimum/Maximum Pressure with Rating at 72° (22°C)

    Disk Size Burst Pressure Disk Thickness ANSI Flange Rating DIN
    psig barg
    in mm min max min max in mm
    0.5 15 25 250 1.7 17 0.6  16 150 10/16
    0.5 15 25 1000 1.7 69 0.6  16 300/600 25/40
    0.75 20 25 250 1.7 17 0.6  16 150 10/16
    0.75 20 25 1000 1.7 69 0.6  16 300/600 25/40
    1 25 10 250 0.7 17 0.9 22 150 10/16
    1 25 10 1000 0.7 69 0.9 25 300/600 25/40
    1.5 40 7 250 0.5 17 0.9 22 150 10/16
    1.5 40 7 1000 0.5 69 1.0 25 300/600 25/40
    2 50 2 250 0.1 10.3 0.9 22 150 10/16
    2 50 3 500 0.2 34 1.0 25 300/600 25/40
    3 80 1 250 0.1 17 0.9 22 150 10/16
    3 80 2 500 0.1 34 1.2 32 300 25/40
    4 100 1 250 0.1 17 0.9 22 150 10/16
    4 100 1.5 500 0.1 34 1.3 32 300 25/40
    6 150 1 170 0.1 12 0.9 22 150 10/16
    6 150 1 450 0.1 31 1.8 44 300 25/40
    8 200 0.5 170 0.04 12 1.1 29 150 10/16
    8 200 0.5 450 0.04 31 2.3 57 300 25/40
    10 250 0.3 150 0.02 10 1.5 38 150 10/16
    12 300 0.3 150 0.02 10 2.0 51 150 10/16
    14 350 0.3 150 0.02 10 2.3 57 150 10/16
    16 400 0.3 150 0.02 10 2.5 64 150 10/16
    18 450 0.3 150 0.02 10 2.8 70 150 10/16
    20 500 0.3 150 0.02 10 3.0 76 150 10/16
    24 600 0.3 150 0.02 3.4 3.0 76 150 10/16

    Burst Tolerance

    Marked Burst Pressure Burst Tolerance
    < 1 psig (0.07 barg) -0/+0.75 psig (0/0.05 barg)
    1 – 15 psig (0.07 barg < 1.03 barg) ± 0.75 psig (0.05 barg)
    > 15 psig (1.03 barg) ± 5%
    For sizing, see the BS&B website or contact BS&B for appropriate KR

    Example: If a Saf-T-Graf IMB type disk is ordered with a 29 psig (2 bar) burst pressure, it will burst between 27.5 psig (1.9 bar) and 30.5 psig (2.1 bar). For reduced tolerances contact BS&B.

    Armored Option

    Armor is recommended for all graphite disks for added safety and elimination of breakage during installation. Armor consists of a steel ring encircling the outside diameter of the graphite rupture disk.

    Armor is standard on disks with burst pressures in excess of 150 psig or to fit ANSI Class 300 / 600 flanges. Carbon steel armor is standard with 300 series stainless steel as an option. Armor is recommended for applications where lateral blow out / loss of containment represents a safety concern.

    Armor for disks sizes shown when rated pressures equal to or exceed values in the below chart.

    Size Burst Pressure
    in mm psig barg
    0.5-3 15-80 150 10.3
    4 100 100 6.9
    6-10 75 75 5.2
    12-24 50 50 3.5

    Product Literature

    Saf-T-Graf™ Graphite Disks
    Burst Alert Sensors
    Detec Saf Alarm System – Burst Disk Monitor