DKB™
超低圧両方向作動破裂板
性能
お問い合わせはこちらから
Sizes & Pressures
DKB™ Disk Specifications Minimum/Maximum Pressure with Rating at 72° (22°C)
| Disk Size | Vacuum Relief | Vacuum Relief Area | Overpressure Relief | ||||||||
| in WC | mbar | psig | barg | ||||||||
| in | mm | min | max | min | max | in2 | cm2 | min | max | min | max |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 50 | 7.5 | 44 | 19 | 110 | 1.5 | 9.7 | 18 | 170 | 1.2 | 12 |
| 3 | 80 | 6.5 | 30 | 16 | 75 | 3.6 | 23.0 | 16 | 170 | 1.1 | 12 |
| 4 | 100 | 5.5 | 30 | 14 | 75 | 5.9 | 38.3 | 13 | 119 | 0.9 | 8.2 |
| 6 | 150 | 5.5 | 30 | 14 | 75 | 12.3 | 79.4 | 13 | 90 | 0.9 | 6.2 |
| 8 | 200 | 5.5 | 20 | 14 | 50 | 18.5 | 119.4 | 7 | 55 | 0.5 | 3.8 |
Burst Tolerance
| Marked Burst Pressure | Burst Tolerance |
|---|---|
| < 40 psig (2.76 barg) | ± 2 psig (0.138 barg) |
| > 40 psig (2.76 barg) | ± 5% |
Sensors
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
Product Literature
Installations
Sizes & Pressures
DKB™ Disk Specifications Minimum/Maximum Pressure with Rating at 72° (22°C)
| Disk Size | Vacuum Relief | Vacuum Relief Area | Overpressure Relief | ||||||||
| in WC | mbar | psig | barg | ||||||||
| in | mm | min | max | min | max | in2 | cm2 | min | max | min | max |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 50 | 7.5 | 44 | 19 | 110 | 1.5 | 9.7 | 18 | 170 | 1.2 | 12 |
| 3 | 80 | 6.5 | 30 | 16 | 75 | 3.6 | 23.0 | 16 | 170 | 1.1 | 12 |
| 4 | 100 | 5.5 | 30 | 14 | 75 | 5.9 | 38.3 | 13 | 119 | 0.9 | 8.2 |
| 6 | 150 | 5.5 | 30 | 14 | 75 | 12.3 | 79.4 | 13 | 90 | 0.9 | 6.2 |
| 8 | 200 | 5.5 | 20 | 14 | 50 | 18.5 | 119.4 | 7 | 55 | 0.5 | 3.8 |
Burst Tolerance
| Marked Burst Pressure | Burst Tolerance |
|---|---|
| < 40 psig (2.76 barg) | ± 2 psig (0.138 barg) |
| > 40 psig (2.76 barg) | ± 5% |
Sensors
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
