性能

  • 気相・液相・混合流体兼用
  • 破裂圧力の90%まで運転可能
  • 破片飛散なし、安全弁一次側設置の推奨製品
  • ダメージ安全率 ≤1(ダメージがある場合表示破裂圧力の1倍以下で破裂する)
  • 周期的に圧力変動する運転状況に適している
  • バキュームサポートの取り付けにより真空耐性あり
  • ASME “UD”スタンプ対応(製造範囲0%/-5%/-10%選定)
  • 圧力機器指令”CE”マーク及びその他国際証書対応
  • BS&B独占技術

  • お問い合わせはこちらから

     

    Sizes & Pressures

    ECR™ Disk Specifications Minimum Pressure (determined by disk type and gasket material)
    Disk Size Buna N, Viton, silicone and EPDM gaskets Fluoropolymer gaskets (process side for ECR only)
    in mm ECR and V/ECR ECV and V/ECV ECR-S and V-ECR-S ECV-S and V/ECV-S ECR and V/ECR ECV and V/ECV
    psig barg psig barg psig barg psig barg psig barg psig barg
    1 25 2 0.1 8 0.6 6.5 0.5 8 0.6 6.5 0.5 12 0.8
    1.5 40 2 0.1 5 0.3 4.5 0.3 5 0.3 4.5 0.3 7 0.5
    2 50 2 0.1 3 0.2 3 0.2 3 0.2 3 0.2 5 0.4
    3 80 1 0.1 2 0.1 2 0.1 2 0.1 2 0.1 5 0.4
    4 100 1 0.1 2 0.1 2 0.1 2 0.1 2 0.1 4 0.2
    6 150 1 0.1 2 0.1 2 0.1 2 0.1 2 0.1 4 0.2
    8-10 200-250 1 0.1 1.5 0.1 1.5 0.1 1.5 0.1 1.5 0.1 2 0.1
    12-24 300-600 1 0.1 1 0.1 1 0.1

    ECR™ Disk Specifications Maximum Pressure (determined by disk type and gasket material)
    Disk Size Buna N gaskets Viton®, silicone and EPDM gaskets
    in mm ECR and V/ECR ECV and V/ECV ECR-S and V-ECR-S ECV-S and V/ECV-S ECR and V/ECR ECV and V/ECV ECR-S and V-ECR-S ECV-S and V/ECV-S
    psig barg psig barg psig barg psig barg psig barg psig barg psig barg psig barg
    1 25 100 6.9 100 6.9 100 6.9 100 6.9 25 2 25 2 25 2 25 2
    1.5 40 80 5.5 80 6 80 5.5 80 6 25 2 25 2 25 2 25 2
    2 50 80 5.5 80 6 80 5.5 80 6 25 2 25 2 25 2 25 2
    3 80 50 3.5 50 3.5 50 3.5 50 3.5 25 2 25 2 25 2 25 2
    4 100 50 3.5 50 3.5 50 3.5 50 3.5 25 2 25 2 25 2 25 2
    6 150 50 3.5 50 3.5 50 3.5 50 3.5 25 2 25 2 25 2 25 2
    8-10 200-250 15 1 15 1 15 1 15 1 15 1 15 1 15 1 15 1
    12-24 300-600 15 1 15 1 15 1 15 1
    Disk materials nickel (alloy 200); 316L stainless steel; Hastelloy® (alloy C-276); Inconel® (alloy 600); Monel® (alloy 400); and tantalum are available with the same min/max burst pressures. Consult BS&B for applications where the disk may be rated with a coincident specified temperature below the maximum process temperature to which the disk may be exposed. Note: Hastelloy® is a trademark of Haynes International Inc. Monel® and Inconel® are registered trademarks of Special Metals Corporation and Its subsidiaries. Note: Viton® is a trademark of the Chemours Company FC, LLC

    Burst Tolerance

    Marked Burst Pressure Burst Tolerance
    ≤ 40 psig (2.76 barg) ± 2 psig (0.138 barg)
    > 40 psig (2.76 barg) ± 5%

    Accessories

    BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.

    Saf-T-Change Quick Disk Replacement (QDR)

    After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.

    Tell-Tale Assemblies & Excess Flow Valves/Gauges

    A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.

    Spare Safety Heads & Cap Screws

    Jackscrews

    When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.

    Lifting Lug Eye Bolts

    Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.

    Baffle Plate

    When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.

    Product Literature

    Eco-Saf Series
    Saf-T-Change™ QDR Rupture Disk Replacement System
    Burst Alert Sensors
    Detec Saf Alarm System – Burst Disk Monitor

    Sizes & Pressures

    ECR™ Disk Specifications Minimum Pressure (determined by disk type and gasket material)
    Disk Size Buna N, Viton, silicone and EPDM gaskets Fluoropolymer gaskets (process side for ECR only)
    in mm ECR and V/ECR ECV and V/ECV ECR-S and V-ECR-S ECV-S and V/ECV-S ECR and V/ECR ECV and V/ECV
    psig barg psig barg psig barg psig barg psig barg psig barg
    1 25 2 0.1 8 0.6 6.5 0.5 8 0.6 6.5 0.5 12 0.8
    1.5 40 2 0.1 5 0.3 4.5 0.3 5 0.3 4.5 0.3 7 0.5
    2 50 2 0.1 3 0.2 3 0.2 3 0.2 3 0.2 5 0.4
    3 80 1 0.1 2 0.1 2 0.1 2 0.1 2 0.1 5 0.4
    4 100 1 0.1 2 0.1 2 0.1 2 0.1 2 0.1 4 0.2
    6 150 1 0.1 2 0.1 2 0.1 2 0.1 2 0.1 4 0.2
    8-10 200-250 1 0.1 1.5 0.1 1.5 0.1 1.5 0.1 1.5 0.1 2 0.1
    12-24 300-600 1 0.1 1 0.1 1 0.1

    ECR™ Disk Specifications Maximum Pressure (determined by disk type and gasket material)
    Disk Size Buna N gaskets Viton®, silicone and EPDM gaskets
    in mm ECR and V/ECR ECV and V/ECV ECR-S and V-ECR-S ECV-S and V/ECV-S ECR and V/ECR ECV and V/ECV ECR-S and V-ECR-S ECV-S and V/ECV-S
    psig barg psig barg psig barg psig barg psig barg psig barg psig barg psig barg
    1 25 100 6.9 100 6.9 100 6.9 100 6.9 25 2 25 2 25 2 25 2
    1.5 40 80 5.5 80 6 80 5.5 80 6 25 2 25 2 25 2 25 2
    2 50 80 5.5 80 6 80 5.5 80 6 25 2 25 2 25 2 25 2
    3 80 50 3.5 50 3.5 50 3.5 50 3.5 25 2 25 2 25 2 25 2
    4 100 50 3.5 50 3.5 50 3.5 50 3.5 25 2 25 2 25 2 25 2
    6 150 50 3.5 50 3.5 50 3.5 50 3.5 25 2 25 2 25 2 25 2
    8-10 200-250 15 1 15 1 15 1 15 1 15 1 15 1 15 1 15 1
    12-24 300-600 15 1 15 1 15 1 15 1
    Disk materials nickel (alloy 200); 316L stainless steel; Hastelloy® (alloy C-276); Inconel® (alloy 600); Monel® (alloy 400); and tantalum are available with the same min/max burst pressures. Consult BS&B for applications where the disk may be rated with a coincident specified temperature below the maximum process temperature to which the disk may be exposed. Note: Hastelloy® is a trademark of Haynes International Inc. Monel® and Inconel® are registered trademarks of Special Metals Corporation and Its subsidiaries. Note: Viton® is a trademark of the Chemours Company FC, LLC

    Burst Tolerance

    Marked Burst Pressure Burst Tolerance
    ≤ 40 psig (2.76 barg) ± 2 psig (0.138 barg)
    > 40 psig (2.76 barg) ± 5%

    Accessories

    BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.

    Saf-T-Change Quick Disk Replacement (QDR)

    After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.

    Tell-Tale Assemblies & Excess Flow Valves/Gauges

    A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.

    Spare Safety Heads & Cap Screws

    Jackscrews

    When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.

    Lifting Lug Eye Bolts

    Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.

    Baffle Plate

    When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.

    Product Literature

    Eco-Saf Series
    Saf-T-Change™ QDR Rupture Disk Replacement System
    Burst Alert Sensors
    Detec Saf Alarm System – Burst Disk Monitor

    概要

    ECR™ 型は運転中圧縮力を受けている反転型破裂板で気体/ベーバー、液体のどれにも適応し圧力解放します。ECR破裂板は、ドームの周縁部にスコア溝の加工された設計になっています。アッセンブリー型ホルダーによりガスケットが作動し、スコア溝がシールされる構造です。反転型破裂板のスナップアクション技術により最低設定圧力を実現することで、脆弱な溝付き複合破裂板設計を選択する必要がなくなります。