AVB-ST™
高気圧バキュームブレーカー
性能
- 気相・液相・混合流体兼用
- 破裂圧力の70％まで運転可能 （破裂誤差下限の75％まで） – 過剰圧力方向
- 破裂圧力の55％まで運転可能 （破裂誤差下限の60％まで） – 真空方向
- 圧力機器指令” CE” マーク及びその他国際証書対応
- BS&B 独占技術
- フランジホルダー/サニタリーホルダーに適応
お問い合わせはこちらから
Sizes & Pressures
AVB™ Positive Pressure Disk Specifications Minimum/Maximum Pressure with Rating at 72° (22°C)| Disk Size | Burst Pressure | Relief Area | ||||
| psig | barg | |||||
| in | mm | min | max | min | max | |
|---|---|---|---|---|---|---|
| 3 | 80 | 5 | 100 | 0.35 | 6.89 | Full |
| 4 | 100 | 5 | 100 | 0.35 | 6.89 | Full |
| 6 | 150 | 3 | 85 | 0.21 | 5.86 | Full |
| 8 | 200 | 3 | 85 | 0.21 | 4.48 | Full |
Note: Burst range includes all tolerances. No additional manufacturing design range
| Disk Size | Burst Pressure | Burst Range | Relief Area | ||||||
| psig | barg | ||||||||
| in | mm | min | max | min | max | psig | barg | in2 | cm2 |
|---|---|---|---|---|---|---|---|---|---|
| 3 | 80 | 3 | 10 | 0.2 | 0.7 | ± 0.5 | ± 0.4 | 2.0 | 13.1 |
| 4 | 100 | 2 | 10 | 0.1 | 0.7 | ± 0.5 | ± 0.4 | 3.6 | 23.1 |
| 6 | 150 | 1.5 | 6 | 0.1 | 0.4 | ± 0.3 | ± 0.02 | 5.9 | 38.3 |
| 8 | 200 | 1 | 6 | 0.1 | 0.4 | ± 0.3 | ± 0.02 | 9.3 | 59.7 |
Burst Tolerance
| Marked Burst Pressure | Burst Tolerance |
|---|---|
| 3 to 5 psig (0.2 to 0.4 barg) | ± 25 psig |
| 6 to 8 psig (0.4 to 0.6 barg) | ± 20 psig |
| 9 to 12 psig (0.6 to 0.8 barg) | ± 15 psig |
| 13 to 17 psig (0.9 to 1.2 barg) | ± 10 psig |
| 18 to 25 psig (1.2 to 1.7 barg) | ± 7 psig |
| 26+ psig (1.8+ barg) | ± 5 psig |
Safety Heads
Sensors
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
Product Literature
Sizes & Pressures
AVB™ Positive Pressure Disk Specifications Minimum/Maximum Pressure with Rating at 72° (22°C)| Disk Size | Burst Pressure | Relief Area | ||||
| psig | barg | |||||
| in | mm | min | max | min | max | |
|---|---|---|---|---|---|---|
| 3 | 80 | 5 | 100 | 0.35 | 6.89 | Full |
| 4 | 100 | 5 | 100 | 0.35 | 6.89 | Full |
| 6 | 150 | 3 | 85 | 0.21 | 5.86 | Full |
| 8 | 200 | 3 | 85 | 0.21 | 4.48 | Full |
Note: Burst range includes all tolerances. No additional manufacturing design range
| Disk Size | Burst Pressure | Burst Range | Relief Area | ||||||
| psig | barg | ||||||||
| in | mm | min | max | min | max | psig | barg | in2 | cm2 |
|---|---|---|---|---|---|---|---|---|---|
| 3 | 80 | 3 | 10 | 0.2 | 0.7 | ± 0.5 | ± 0.4 | 2.0 | 13.1 |
| 4 | 100 | 2 | 10 | 0.1 | 0.7 | ± 0.5 | ± 0.4 | 3.6 | 23.1 |
| 6 | 150 | 1.5 | 6 | 0.1 | 0.4 | ± 0.3 | ± 0.02 | 5.9 | 38.3 |
| 8 | 200 | 1 | 6 | 0.1 | 0.4 | ± 0.3 | ± 0.02 | 9.3 | 59.7 |
Burst Tolerance
| Marked Burst Pressure | Burst Tolerance |
|---|---|
| 3 to 5 psig (0.2 to 0.4 barg) | ± 25 psig |
| 6 to 8 psig (0.4 to 0.6 barg) | ± 20 psig |
| 9 to 12 psig (0.6 to 0.8 barg) | ± 15 psig |
| 13 to 17 psig (0.9 to 1.2 barg) | ± 10 psig |
| 18 to 25 psig (1.2 to 1.7 barg) | ± 7 psig |
| 26+ psig (1.8+ barg) | ± 5 psig |
Safety Heads
Sensors
Accessories
BS&B supplies many of the accessories required to safely and conveniently install our overpressure relief devices and complementary products. Through our professional team and global network of sales engineers and procurement personnel, we are able to provide the highest quality accessory products to meet your installation requirements.
Saf-T-Change Quick Disk Replacement (QDR)
After activation, the replacement disk is quickly slid into place. Saving hours of lost production due to blown rupture disks.
Tell-Tale Assemblies & Excess Flow Valves/Gauges
A gauge tap in the outlet flange of the safety head may be considered when the safety head is installed in a vertical position.
Spare Safety Heads & Cap Screws
Jackscrews
When activated, the jackscrews effectively separate the flanges, providing adequate clearance to remove or insert a safety head and external gaskets.
Lifting Lug Eye Bolts
Eye bolts are recommended when weight and/or accessibility is a factor in lifting safety heads.
Baffle Plate
When a safety head is free-vented to atmosphere, a baffle plate may be considered to disperse overpressure and absorb recoil.
